On-One Carbon XC Whippet Frame / White Frame / Red Decal / 20 Inch

• From £249.99
• £499.99
• free UK delivery on orders > £20

On-One Whippet Carbon XC MTB Frame

Newly updated fully painted design now in stock. These look the business and still ride faster than any other MTB frame we know of. Incredible value- the ultimate speed chassis.

The Whippet

Ride all your favorite routes at greater speed, with increased confidence; fly up climbs, tackle technical sections with greater precision and be more assertive on descents.

We think our Whippet is the ultimate short-travel Carbon XC frame. With 6 months in development we've hit on a cross-country frame that we're really proud of. What started with the race proven Scandal geometry, that's excelled on the UK cross country circuit, is now even lighter, stiffer, faster and fun to ride.

Note: limited edition coloured frames are supplied with silver swap-outs and not the red ones pictured.

Features:

• Lightweight - 1300g
• Designed specifically for cross-country riding
• Long top-tube - creating an XC riding position
• Non-tapered Integrated headset with low stack height - lower rider position. Takes FSA Orbit CE Integrated Headset
• BB92 bottom bracket - Wider, stiffer and more power
• 31.6mm seat-tube - less flex, more choice of seat-posts
• Top tube cable routing- Clear of the crap. Easier to maintain
• Generous tyre clearance - No mud worries
• Swapouts - run singlespeed or gears (geared version is supplied, slot version available separately)
• Direct mount front- Shimano and SRAM compatible
• Seat clamp not included.

Front Mech Compatibility:

The Carbon Whippet uses a direct mount front mech which saves weight and allows for an optimum seat tube profile. However, MTB direct mount formats have been slow to standardise and new 10 speed front mech systems have become more bulky- some models can foul the frame on the lowest gear.

For best results use the same make of chainset and front mech. The following front mechs work fine:
High Direct Mount (HDM):
Any SRAM HDM, 2x10, DUAL PULL
Low Direct Mount (LDM):
SRAM XX LDM 2x10 S3 42 TOP PULL- limited to 42T Chainsets

The following Mechs need a 1mm washer between the HDM plate and the mech:
Any SRAM HIGH DIRECT MOUNT, 3x10, DUAL PULL
Shimano FD-M771-D (XT) 9 speed
Shimano FD-M661-D (SLX) 9 speed
Shimano FD-M771-10D (XT) 10 speed
Shimano FD-M661-10D (SLX) 10 speed

The following front mechs do not fit:
Low Direct Mount:
All Shimano LDM
Eg: Shimano FD-M771-E

All SRAM LDM excluding XX S3

Chainset / BB92 compatibility:

The Carbon Whippet frame was designed specifically to work with a new breed of double chainsets for XC competition use. It features an oversized super wide BB92 bottom bracket shell which increases stiffness and makes for optimal power transfer. However, we've found that the inner spider bolts on certain triple chainsets may foul the paint on the BB shell.

The Whippet is recommended for use only with the following chainsets:

All Hollowtech 2 / GXP / Megaexo (24mm axle) style 2x10 and single speed chainsets
All Shimano Hollowtech 2 (24mm axle) 3x9 and 3x10 chainsets.

Note: Chainsets should be used with a BB92 bottom bracket of the same make for best fit.

This frame is brand new and has never been built up or ridden. It has two imperfections in the lacquer on the top tube and a tiny chip on the chain stay.

Everything in the clearance corner has been checked by our mechanics and technical experts. We only have one of these for sale, available today, same day dispatch. If you have any questions, give our team a call on: +44 (0)1709 38 66 63